Why You Should Replace Your Tires With The Ones It Came With Originally: Ask An Engineer

Image (37)
ADVERTISEMENT

Hello Autopians. Welcome to another edition of Ask an Engineer. Let’s start off this week with a question from Pieter about why his car was only available with 20-inch wheels, then we’ll chat about whether crossovers are tougher than cars and about the AE86 Toyota’s handling.

Pieter lives in Belgium and he has got himself a very nice new Renault Grand Scenic as a company car. It’s not a car he would necessarily have chosen himself but a free car is a free car after all. His question relates to the tires, which are P195/55R20. Apparently the new Scenic comes only with this tire size regardless of trim level and he thought that was odd. He also wondered why his car might have been equipped with steel wheels instead of aluminum alloys and what difference that would have made.

Sticking With Your OEM Tires, Some Notes About Wheel Sizes

Well, Pieter, I too find the choice of 20” wheels across the board odd, but there could be a very good reason for this. I can’t look into the minds of the engineers and product planners at Renault but one reason to have a single tire size is that tire development is expensive and time consuming. If you can release a new vehicle with the same tire on all trim levels it saves a lot of time and money during development. A lot of effort is put into making sure the tires a car is sold with perform at the high levels a manufacturer specifies. This process can take over a year to complete and requires the tire manufacturer to make several “submissions” to the car company. 

In each submission, the tire company will provide several hundred tires with different types of construction and rubber compounds. The constructions may vary in the way the steel and nylon belts are oriented, or what rubber compounds are used in the tread blocks. Each design will behave differently and the vehicle development engineers will then spend several weeks testing each of the tires to see which one works the best in the car. They will test each tire for cornering, stopping, and acceleration performance in dry and wet conditions. They will test the amount of noise a tire makes over various types of road surfaces. They will see how well the tire communicates road conditions through the steering system. Does the tire wander over minor road imperfections? Is it sensitive to ruts in the road? They may also test it on special machines to get an estimate of tire life. 

Stick With OEM Rubber

All this can take several months to complete and it will usually happen about three times, with each successive submission refining the tire construction until hopefully by the third submission there is at least one construction that meets the targets set by the company for that particular vehicle. These targets, as well as many other vehicle targets, like cost, weight, fuel economy, vehicle size, etc. are set very early in a vehicle program to meet the expectations of the expected customer. The overall vehicle targets then get broken down into targets for each individual system, including the suspension and tires. Often the targets are based on vehicles made by the company’s competition, and also by doing a bit of guesswork on how the competition’s future products might improve — a process called “futuring.” You have to make some assumptions about how everyone else’s products are going to get better in the years it takes to bring a new car to market and make sure your product is as good or better than that. You don’t want to get into a situation where your new car is just as good as what your competition had four years earlier. 

Once the engineers find a tire submission that meets (or even exceeds) the vehicle targets, that submission will be released for production. Since so much work has gone into choosing the right tire construction for a particular car, it is almost always advisable to replace your car’s tires with the same ones it came with. Round and black is not sufficient. All tires are absolutely NOT the same and choosing a non-OEM specified tire can have significant effects on the ride and handling of your car. It can also have a very strong effect on steering feel.

The tuning of the tire and the tuning of the steering system go hand-in-hand, as the rubber plays a big role in communicating the steering feel the manufacturer wants. That great steering feel and handling confidence your BMW 3 Series has can quickly disappear if you put some generic aftermarket tire on it. More importantly though, if the replacement tires don’t have the same amount of traction as the OEM tires, you could increase your stopping distances and hurt braking performance. Replace your car’s tires with the same brand and model it came with and you will likely be much happier in the long run.

Upselling

Now let’s get back to Pieter. The thing I find odd about the choice of a single tire size is that auto companies like to make money. Preferably lots of money. And one way to do this is to get your customers to buy extra things for their car. It’s called up-selling and one of the best up-selling items is wheels. Sell a base car with 18” dull wheels and your customers will spend thousands on optional 19” and 20” wheels because they just look better. If all your cars come with 20” wheels the look of the optional wheels is not nearly as different from the base wheels as it could be. Most manufacturers have calculated that the expense of the added tire development is more than offset by the profits from selling optional wheels and tires. Renault clearly felt differently in this case.

What Renault HAS done here is offer a steel wheel as base and have an optional aluminum alloy wheel. Steel wheels are cheap to make so they help keep the base vehicle cost down but they have significant aesthetic limitations. That’s why most steel wheels come with hubcaps that make them look like alloy wheels. Hubcaps can fall off though, and they can crack and discolor, ultimately tending to look like cheap versions of the real thing. Steelies are also less stiff than aluminum wheels, which is bad for handling — perhaps not an issue for a Renault Grand Scenic, but it might be for some other cars.

So there you have it, Pieter. Enjoy your new free Grand Scenic. As they say, “drive the wheels off it”! En tot ziens.

Crossover Versus Car: Which Is Tougher?Image (36)

Andrew P. asked a question regarding the “rugged” look of many crossovers and if this actually represents additional capacity in terms of durability versus the regular cars many of them are based on. Well, Andrew, the answer is “it depends.” It depends on the manufacturer and on the vehicle. Some manufacturers do use different durability testing cycles for their crossovers and some don’t. At one of the OEMs I worked for, SUVs, especially the large ones, had a durability test that was a hybrid between cars and trucks. It meant they were tougher than cars but not as tough as trucks. In other cases, though, there was a recognition that the crossover would see no more than mall duty and there was no need to build in the extra weight and cost required to meet a higher durability standard. It really depended on who the target customers were.

Where these vehicles really benefit from a durability standpoint is with their tires. The first line of defense against potholes and other road impacts is the tire, and the larger the tire, the better it is at absorbing those impacts and at protecting the rest of the car. The part of the tire size that matters here is the sidewall height since this is the rubber that gets deformed when you hit a pothole or other bump in the road. It’s very easy to figure out how much sidewall you have by looking at the tire size numbers. Take the first number in the tire size and multiply by the second number and then divide by 100. For example, a P225/50R19 tire will have a sidewall height equal to 225 X 50 / 100 = 112.5 mm.

Now take the 2022 Toyota Camry, which comes with P215/55R17 tires in base trim. That tire has a sidewall of 215 x 55 / 100 = 118.25 mm. The same year Highlander has a base tire of P235/65R18 which has a sidewall height equal to 235 X 65 / 100 = 152.75 mm. That extra 34.5 mm represents a significant extra cushion that the Highlander has before the edge of that pothole hits the rim and does some serious damage. It means that the Highlander tire will protect the rest of the car much better than the Camry tire driving over the same road. That’s not to say that the Camry tire will do a poor job. 118 mm is still more than enough to protect the car on most roads. It just means that it will take a much bigger impact to damage the Highlander than the Camry.

Why Can The Toyota AE86 Out-Handle The Honda Accord?

Image (38)

Jonathan asked me a question about the AE86 Toyota which has what appears to have a very basic suspension setup — MacPherson strut front and live axle rear, while the same era Honda Accord had double wishbones. The AE86 is by many considered to be a much better handling car than the Honda and Jonathan wonders why that might be given the difference in technology between the cars.

Well, Jonathan, what you are seeing is there is more to car ride and handling than just suspension choice. The AE86 may have had a basic suspension but it was designed from the beginning as a rear wheel drive (RWD) car while the Honda was always meant to be front wheel drive (FWD). Designing a FWD car means you make vehicle level decisions that favor a front heavy car. The heavy engine and transmission are all in front with the majority of the engine ahead of the front wheels. Since the transmission ends up slightly behind the engine and the front wheels must be inline with the output of the transmission, they end up further rearward. That’s why FWD cars often have so much front overhang. All this means a weight distribution around 60% front, or worse. That does not favor a well handling car. The AE86 on the other hand could push the front wheels forward because they weren’t tied to the transmission. The weight of the engine would be placed further rearward and the transmission was behind that. All that meant that the AE86 only carried 53.5% of its weight in the front. That’s a big difference and will definitely be felt in the handling of the car regardless of how sophisticated the suspension is.

Well that’s it for this week. Please keep those questions coming to askanengineer@autopian.com and I’ll do my best to keep this discussion lively and informative.

About the Author

View All My Posts

118 thoughts on “Why You Should Replace Your Tires With The Ones It Came With Originally: Ask An Engineer

  1. As I remember reading Michelin and Honda teamed up on the Ridgeline to make a specific version of the LTX. Loved mine and loved the tires.
    On the other hand, I’ve seen several new cars come with different brand but same size tires. From what I’ve seen manufacturers will use whatever holds air unless you’re talking about a specific vehicle that requires a specific tire with specific capabilities. Tires are a minor hobby of mine. A little research will reveal different SKUs between OEM and aftermarket tires and between different aftermarket retailers so shopping closely will pay in the long run. By and large you get what you pay for.

  2. There are some obvious flaws with the premise of this article. Now we’ll just have to keep an eye on Huibert to make sure he never writes an article touting the virtues of using winter tires in the winter or summer tires in the summer. Because, y’know, they’re not OEM. 🙂

  3. My wife’s vehicle is a ’20 Subaru Outback Onyx XT. No complaints about the OEM rubber, but when one needed to be replaced last year, the only place to get the exact Yokohama that’s on the car was a Subaru dealer. The tires are made specifically for Subaru and most tire shops either couldn’t get them or, if they could order them, there was a long wait and a much higher price than the Subaru dealers.

    I’m hoping we don’t have another one go before it’s time to replace them all. I don’t want to buy a Subaru specific tire and I want road hazard (pays for itself every time here in FL).

  4. Some OE tires are good to excellent. Those would be plenty fine to get another set of.

    Other OE tires are absolutely horrendous and there will be *zero* downsides to replacing them with something else.

    So…this definitely is not a universally correct statement.

  5. I haven’t owned a car yet that wasn’t improved by replacing the OEM tires. The Yokohamas that came on my Mazda2 were slippery and wore out fast. The Goodyear LRR tires on my Volt dry rotted in a few years to the point I was afraid of a sidewall blowout. The Michelin LRR tires on my next Volt were nearly bald by about 25k miles.

  6. There is no way Toyota put anything but cost into their decision on which tires to equip in the camry I drove. Downright dangerous handling in the wet and generally abysmal performance in every other respect. Never will I believe that every manufacturer goes through the process outlined above.

  7. While I understand the idea of OEM tires being engineered for the specific use case based on parameters set by the manufacturer’s engineers, the compromises are often way to skewed in one direction. For instance, the OE Continentals on my 2018 Audi allroad were OK, but succumbed to damage far to often to be worth the price. Sure, they were lightweight, delivered pretty good fuel economy, and had decent traction, but they also tramlined like crazy and cost 40% more than a superior Michelin PS4 all season tire.

    Now that I switched to Michelins, my fuel economy is down by about 1-2 MPG overall (less than 5%), but the traction, steering feel, ride, and noise are all much improved. Totally worth it for the overall experience, and makes my car actually feel like an audi. All too often, even luxury car manufacturers are prioritizing fuel economy over all other factors, which is really a garbage decision.

  8. I’m sorry, I can understand in some cases. But never in mine. New 2019 Corolla Hatchback had some Dunlop’s on them. I got a whopping 18k miles. That’s insane.

    But otherwise loving these articles!

  9. OE tyres and replacement tyres often have different standards to them and the replacement tyres are ones that don’t meet a criteria that the OE requires (visual defects for example). The OE tyre is primarily a first impression tyre and is optimised for the vehicle, but might have a specific target in mind like towing stability or low rolling resistance.

    I would never restrict myself to OE replacement tyres when replacing what is on my car as you don’t know what they manufacturer prioritised. They could have selected a dynamically inferior tyre due to a combination of delivery time and cost.

  10. I have a 2003 Z06 corvette
    Front Tire Size: 265/40/17
    Rear Tire Size: 295/35/18

    They came with runflats that are not made anymore and the only tire made in the front size is a PS2. Everyone on the internet has a crazy almost the right size solution but not the same and stretched on the rim or the tcs gets confused or something. The car has the original tires from 2003 and is a death machine on them. I was not aware of the tire issue when I bought the car.

    I ordered Michelin PS2’s for the front and Michelin super sports for the back (No PS2 in that size). Am I a dumbass? Probably. Is it the best solution I could find after months of searching? I think so.

    Any experts out there to tell me I’m right or an idiot?

  11. My 2018 Elantra GT Sport came with Hankook Ventus S1 Noble2 tires (horrible name, horrible tire) that were absolute trash. After a year of hydroplaning and overactive traction control, I replaced them with BFG G-Force Comp2s and have never been happier. Hyundai clearly made a mistake, because the 2019/2020 N-Line cars (same car, different name) came with Michelin Pilot Sport 4s.

  12. Huibert, do car manufacturers recommend or optimize for certain snow tires? I often will go with one size smaller wheels for my snows to save a few bucks. I have never looked up a manufacturer recommendation.

Leave a Reply