Here’s How A Brilliant 24 Hours Of LeMons Team Saved Me From Getting Stranded In Our Broken Mercedes Wagon

Wacky Racerstop
ADVERTISEMENT

A couple of weekends ago, I found myself in what seemed to be an impossible situation. Our 1999 Mercedes-Benz E320 ‘Ski-Klasse’ wagon failed spectacularly while on the Gambler 500. Its hydraulic suspension suffered from a shock failure, which sent hydraulic fluid spitting out of the vehicle faster than it could be replaced. I had to drive this vehicle 10 hours back home, uncertain if the car would even make it. As luck would have it, I would end up at a 24 Hours Of LeMons race, where a crafty team of racers got me back on the road. Here’s how disaster was turned into a heartwarming story.

I think we have officially reached the end of testing our snow racing car off-road. The Ski-Klasse, a fun car crafted by the genius mind of Bill Caswell, is supposed to be a snow-crushing party wagon. We also felt that maybe it might have some other hidden talents, such as rallycross or maybe an off-road endurance rally. After all, Bill crazy overbuilt this car with a custom structure so beefy I bet you could pull a train with it. [Editor’s Note: Bill did amazing work on this wagon. Like, it’s way cooler than you might think. -DT]. For Matt Hardigree, this car is a test to see if the Mercedes W210 is a more modern Volvo 240.

20230923 123256

Unfortunately, Ski-Klasse has proven itself to be challenging. In Bill’s construction of Ski-Klasse, he found that working on an old Mercedes is more difficult than you would think and just making progress feels a bit like trying to pull a boulder up a hill. Parts failed, bits and pieces were in places you wouldn’t expect, and Mercedes really liked using vacuum for things that didn’t need to be vacuum operated. You can feel Bill’s frustration when you read his evaluation.

And now, through my off-road testing, we know that these old Mercs are so complicated and expensive that emergency field patches to the vehicle’s hydraulic system are nearly impossible, even for a Mercedes specialist. So, is the Mercedes W210 the second coming of the Volvo 240? Well, just keep reading.

Off-Roading The Snow Racer

For a recap of how we got here, Matt and I launched an experiment to see if the snow wagon could handle some light off-roading. I took Ski-Klasse onto a rally track at 4Fest at Holly Oaks ORV Park just outside of Detroit. There, a small bump and a rock deleted the wagon’s muffler and rear bumper cover. I put the car back together and took it out again, just for a pothole-like bump to destroy one of the vehicle’s Hella lights. Then I tried taking on light trails, where the car got stuck a few times.

Matt and I were still interested in the Gambler 500. See, a Gambler 500 is sort of a choose-your-own-adventure thing, where you can opt out of doing hard trails and bypass checkpoints that require a 4×4. In theory, Ski-Klasse could handle it. I’ve been on Gambler 500s where the off-roading involved was no harder than a fire road. In 2020, I successfully rallied a lowered Smart Fortwo on the Gambler 500 Tennessee. Surely, I could replicate the same success with Ski-Klasse, right?

Well, as I detailed in-depth in Part I of this saga, it didn’t work out at all. Click here to read that article, but here are a few paragraphs:

For a while, it seemed as if Ski-Klasse was going to get through this Gambler 500 with little more than some new pinstripes and maybe a few extra bumps to the undercarriage. The convoy I was in took mild trails and dirt roads. There were times the Ski-Klasse got challenged, but the car handled those challenges with surprising grace. In one instance, I got through a mud hole that a lifted Volvo wagon had some trouble with. It helped that this area of Tennessee was going through a bit of a dry spell. So, even the mud holes weren’t particularly deep.

One thing Ski-Klasse had going for it that other vehicles didn’t was the ability to really hustle through dirt. Ski-Klasse effortlessly performed dirt donuts and high-speed turns on smoother trails, stuff that would make your butt pucker in a $500 Jeep ZJ with a collapsed suspension. The drifts were also equally awesome and to me, made up a lot for the lack of ground clearance in other situations.

Yet, despite all of my careful planning and line-picking, the car still found a way to break. Sometime after noon, my convoy decided to take a trail that led to a nice sandy area under Interstate 40 as it crossed the Tennessee River. While there, a few of us took a refreshing swim in the river while others played in the small mud pit behind some foliage. It was the perfect place to stop, relax, and cool off after getting dusted and rocked in our vehicles for hours.

After I saw a mostly stock Subaru wagon go through the mud, I decided that Ski-Klasse could totally handle it. Honestly, the car got through the mud hole with little drama. I heard the skid plate take a hit and I also felt the rear end hit a bump under the muddy water. None of it was particularly violent. The car took harder bumps on Chicago potholes and the skid plate showed no evidence of slamming into something.

A Bump Turns Into A Nightmare

Yet, when I parked, I noticed the rear end was down on its bump stops. The car was squirting out hydraulic fluid at an alarming rate. In fact, the car was hemorrhaging so much hydraulic fluid that it ran itself dry roughly every 5 to 7 minutes. That created an emergency.

See, that hydraulic fluid was gushing out of the Mercedes Self-Leveling System (SLS). SLS is a hydraulic suspension system that automatically levels the rear end of the vehicle to compensate for a load. The system uses hydraulic fluid, accumulator spheres, and hydro shocks to keep the ride height at the rear level. Here’s how it works, from Pelican Parts:

The pump is always creating pressure and pushing fluid through the system. The leveling valve maintains the level of the rear end. It does this by maintaining pressure or diverting it to raise or lower the rear. When the car is unloaded and sitting at the proper ride height the leveling valve is in the Neutral position. In the neutral position the struts and accumulators are still pressurized which maintain the unloaded height along with the springs. The valve maintains the neutral position pressure in the struts and the accumulators by not allowing the pressure to bleed off and also directs the pressure that the pump is creating to back to the reservoir. When a load is put into the back, the lever arm on the valve is deflected into the fill position which diverts the pressure and fluid flow to the struts and accumulators. This pressure expands the struts which lift the rear until the lever arm is in the neutral position again. A check valve in the leveling valve keeps the increased pressure from bleeding off until the arm is deflect into the return flow position. When the load is removed, the arm on the leveling valve is moved to the return flow position which allows the increased pressure in the system to drain off, until the valve returns to the neutral position and the rear of the car to its normal unloaded ride height.

So, what happens if you were to blow a part of this system, say, one of those struts or a line? Well, the SLS fires the hydraulic fluid right out of the break with a geyser of a spray. It doesn’t know the strut is bad, it can’t know that, so fluid is sent through in a vain attempt to lift the rear end. Oh, and the hydraulic system that feeds the SLS also runs the power steering and is driven from a pump run off of the engine’s serpentine belt.

I had to drive about 50 minutes back to camp, where tools and help would be. There was nothing I was able to do on the trail itself. I needed to get to where I could put the car on jackstands.

https://www.instagram.com/reel/CxoDnYvRXqP/

As a result, I raided the shelves of just about every gas station I could stop at on the way back to camp. As you would expect, no gas station in rural Tennessee has the fancy fluid Mercedes wants you to put into the system. Besides, putting that stuff in probably would have bankrupted me. Instead, I fed the monster generic power steering fluid and when that ran out, I started dumping in transmission fluid. Still, I couldn’t feed the car enough and I still ended up running Ski-Klasse for about 10 minutes without any fluid.

According to Bill, all of this was rather bad:

Had I run the pump dry for long enough, it could have burned up and failed. If that failure results in the pump seizing, the engine would almost certainly throw its serpentine belt, resulting in no alternator and no water pump. That shuts down a road trip really quickly.

At first, we thought we were facing broken hydraulic lines and Bill started preparing me for a lengthy battle of fixing it. The hydraulic lines take a weird route, which should have protected them from damage, but to Bill, breaking one of those lines made sense.

Damage Report

20230924 090357

I made it back to camp, barely, with a car that dragged its butt across the ground like a dog. Bill lowered the car one inch during his build, so the car was already lower than stock. Toss in the blown SLS and the car could barely drive over a leaf without impacting the undercarriage (This car was designed to handle on ice/snow, not off-road, so the lowering helps with the agility of the vehicle). The lowest part of the car was the gas tank by a wide margin, and it just barely hung over the ground. It was no surprise to me that by the time I finally got the Ski-Klasse to safety, the tank had taken so many unavoidable hits that it actually crumpled a little bit. Yet, that was the least of my worries.

As luck would have it, I set up my camp next to a prominent Georgia Mercedes-Benz specialist. This guy brought five MB products to the Gambler, all of them modified in awesome ways. There was a lifted SLK, a W123 diesel wagon, an ML SUV, a lifted W210 wagon like ours, and a Smart turned into a Mad Max-esque buggy. If there was anyone at that Gambler who could get me back on the road, it was him.

20230923 083223

The morning after the SLS blew, we jacked Ski-Klasse up to examine the damage. Unexpectedly, we found the hydraulic lines to be in great shape. None of them were leaking or were damaged in such a way that they would start leaking. Likewise, the valve box where the lines meet up was also clean. What wasn’t clean and still had lots of fluid dripping from it was the left rear strut. There was a pool of hydro fluid in the control arm and the strut looked like it had blown apart.

20230924 090132

Bill told me when he serviced the SLS, he replaced the spheres but not the struts. At camp, I was still beating myself up over going through the mud hole. My mission was to get Ski-Klasse through the Gambler 500 unharmed, and I failed so badly at that mission. Honestly, I felt a bit like a failure. Had I just not gone through the mud hole, Ski-Klasse would have been fine. After his examination, however, the Mercedes specialist told me that he didn’t think the mud hole killed the strut. It was an old part and if it didn’t fail in the hole, it probably would have failed somewhere else. Perhaps it would have failed while doing something more innocent, such as driving down the highway.

20230924 112333

Either way, the fact that the strut blew was bad news. The nearest Mercedes-Benz dealership was 45 minutes away and already closed. Plus, the part is pretty expensive even at FCP Euro (thankfully FCP Euro has frequent sales), who knows what the dealership would have charged, even if it had the part in stock. Since it was already nearing afternoon on Sunday and options were awfully limited, we decided to bodge the car back together just enough to get me home. The problem was, none of the bodges worked.

Attempt #1: Rerouting The Serpentine Belt

20230923 160153

The easiest bodge was to get a shorter serpentine belt and effectively delete both the power steering and SLS. In theory, this would work just fine. I found the car easy enough to steer without power steering and it would get me home without burning up the pump.

Unfortunately, we immediately hit a roadblock. The serpentine belt snakes its way around the W210’s accessories in a way we couldn’t figure out to overcome. Even if we did somehow find a smaller belt that fit, the water pump and alternator would end up running backward, and you don’t want that.

Attempt #2: Blocking Off The Pump’s Output

20230924 092446

When we thought the damage was to the hydraulic lines, Bill suggested that we just crimp a line and then shore it up with a vise grip zip-tied to something under the body. This was a fine idea, except for the fact that the lines were perfectly intact.

So, those of us at camp came up with a different plan. What if the pump just didn’t send any fluid to the SLS? We traced the lines back to the pump, where we found more or less two outputs. In theory, if we blocked off the output for the SLS, I would have a pump that wouldn’t seize, power steering, and an inoperative, but not leaking SLS. Brilliant!

Well, we inserted a bolt into the pump’s SLS output. When we fired up the engine, the pump immediately started spewing hydraulic fluid from its seals. Bill figured maybe I killed the pump’s seals by running it dry. The Mercedes specialist wasn’t so sure but told me he did all he could do. Either the vehicle would leak from the blown strut or from the pump. The best I could probably do is limp it home leaking from the pump, which was at least a slower leak.

Attempt #3: Diverting Fluid Away From The Strut

20230924 085824

I wasn’t convinced. See, when the car first blew the strut, I went on an expedition to search for the source of the hydraulic leak. I knew for a fact it leaked only at the rear of the vehicle, not from the pump. In fact, on that very morning, the pump was dry before we decided to block off the SLS output. My conclusion was that the pump leak was from the high pressure necessary for the SLS, not from damage to the pump. Clearly, the pump wasn’t made to have all of that high pressure directed at itself.

Bill came back to me in agreement. We figured the hydraulic system most likely works on a loop, so blocking off a high-pressure part of the system will ultimately lead to too much pressure in the pump itself.

I explained this to the Mercedes specialist and this gave him an idea. We jacked the car back up into the air, reconnected the SLS to the pump, and took a look at the leveling valve lever arm. As the specialist explained, the lever arm’s position tells the leveling valve whether to add or remove fluid from the system. This lever arm could be adjusted so that the SLS thinks the car is level, or even too high when it actually isn’t. That way, the SLS doesn’t attempt to fill the strut. Instead, hydraulic fluid would just loop right back to the pump, with no leaks.

Under the car, the Mercedes specialist put the lever arm at its highest setting, which should tell the SLS that the car doesn’t need fluid in its struts. After adjusting the lever arm, we let the engine run for about five minutes. During that time, there were no leaks. It seemed we finally vanquished my hydro spray woes.

20230924 124302

Then, we put the vehicle back on the ground. I said goodbye to my friends and used the bathroom. When I got back to the car I was the only one at camp. As I was pulling out, the car told me I was low on hydraulic fluid again. I checked behind the vehicle and sure enough, a puddle of transmission fluid sat where the rear left wheel just rolled from. Clearly, whatever worked while the car was in the air no longer worked now that the car was on the ground. I relayed the information to Bill.

Now faced with exactly no help and having exhausted what I thought were all options, I started driving toward home. The pump ran dry and there was nothing I could realistically do about it. I had to drive ten hours; there was no way I could keep dumping any kind of fluid into the pump. So, I crossed my fingers that I would make it home without the pump seizing.

About an hour into my trip, I got a call from Matt and Bill. They figured out a hail mary pass of a bodge. Since the car was lowered, it’s possible that the highest setting of the lever arm was still just a touch too low when the car was actually sitting on the ground. So, we had to lift the car high enough so that the lever arm trick worked while on the ground.

20230923 155934

Bill came up with an idea: what if I just shoved a coil spring spacer into the spring? It should raise the rear end just enough to tell the system to knock it off. Now, this seemed like a winning idea, but there was one problem, well two. The first is that I didn’t have the proper tools to safely get the wounded car in the air and in my experience, those stupid coil spring spacers are darn near impossible to install. I’ve never been able to get one in successfully.

Matt found a nearby Walmart, where I prepared for a nightmare that I wasn’t even sure would work. I figured I’d buy a bunch of tools and end up in a Walmart parking lot until nightfall trying and failing to install a stupid spacer.

That’s when Bill and Matt asked where I was, and I indicated that I was passing by the National Corvette Museum in Bowling Green, Kentucky. Bill quickly ran a search and found out that there was a 24 Hours Of LeMons race happening at NCM Motorsports Park next to the museum. Both told me that if there would be anyone who could fix Ski-Klasse, it would be the crafty racers of a LeMons event.

20230924 154015

As luck would have it, both Bill and Matt knew people in the 24 Hours Of LeMons organization, too.

Attempt #4: The Redneck Fix

Matt and Bill sent me looking for Jay Lamm and Eric Rood. Lamm is “Chief Perp” of the 24 Hours of LeMons while Rood is “Justice of the Lemons Court and Rallymaster.” Sadly, Lamm was not in attendance, but Rood was. I paid for a spectator pass and as I watched a wonderful parade of wacky racers zoom by the paddock, I met up with Rood. He set me up with an empty garage to work on Ski-Klasse and with some LeMons staff who would help me find wrenching help. With all of that secured, I ran to a parts store to pick up some tools and the spacers.

20230924 161050

At first, I tried installing the spacers myself, but surprise, I couldn’t. The spacers I bought were neat in that all you needed to do was insert them into a breaker bar or ratchet and then turn the tool. Only, the hole for the breaker bar or ratchet was smaller than 3/4-inch but larger than 1/2-inch. I figured that the spacer was looking for some increment of square drive socket, which was equal parts ridiculous and difficult to find. Not even the LeMons racers had square drive sockets lying around.

10053487 Atc Ac189001 Alt1 Pri L (1)
AutoZone

After I failed to install the spacers, a flurry of awesome racers stepped up to help me find additional tools and some muscle. Along the way, we obtained a gigantic socket from the owner of the Mazdarati Miata, which fit on the outside of the spacer, bypassing the whole square drive nonsense.

20230924 160635

The awesome folks of Redneck Rampage Racin’ then helped me get Ski-Klasse on the road. They even fed me a delicious burger along the way! If that isn’t kindness and hospitality, I don’t know what is.

20230924 170015

Anyway, the team wasn’t convinced that simply installing the spacer would do the trick. After all, the suspension will dip on bumps and the like on the way home, which would cause the SLS to send some fluid to the blown strut. Instead, the racers decided on a two-fold fix. First, they cut the hydraulic line after the accumulator.

20230924 170206

20230924 171630

Then they would crimp the line off. The logic here is that cutting the line right before it enters the strut will allow the car to pressurize the line without a leak, and then permit the rest of the fluid to circulate as it should. The SLS would work as normal, just without a strut on the left side. The end result would be a vehicle without a leak.

However, once the SLS gets back online, it would almost certainly try to fill the intact strut on the right side, so the second plan was to install a spacer into the left spring. If everything works out, the car will ride level and won’t leak. It would be as good of a field repair as you could get.

20230924 172510

Team Redneck Rampage Racin’ first attacked the hydraulic line with a cutting wheel. Then, they removed the sliced-off line, flattened it with a pair of hammers acting like an anvil, bent it over on itself, and then hammered that down, too. The racers then installed the line back into place.

Getting the spacer in required more power than I had on deck. It took two guys, a breaker bar, and a very long floor jack handle on the end of the breaker bar. Only then did the spacer twist into place. There wasn’t a chance I could have done that myself in the parking lot of a Walmart.

20230924 165954

With both pieces in place, I filled the system up with generic power steering fluid (sorry, Bill) and woke up Ski-Klasse from its slumber. To my surprise and immense joy, the SLS powered up, lifting the right side of the vehicle to the new ride height achieved on the left by the installed spacer. And most importantly, there wasn’t a drop of anything on the ground. After an emergency that had me worried for more than 24 hours by that point, I finally found some relief. Who knew I would find it at a LeMons race.

The Drive Home

20230924 180729

The LeMons repair was remarkable in how much it restored 90 percent of Ski-Klasse’s functions. I did not have the damping benefits of a working strut, so the car took bumps way harder than normal. Some of those bumps unsettled the rear end in a violent manner. But you know what? I was able to easily sustain 80 mph like the car didn’t just spend a day spewing hydraulic fluid. Sadly, the bumps were so harsh that as I tried opening a rear window for ventilation, the regulator failed, sending the glass down to the bottom of the door hard enough to crack. So, I’ll be replacing that window, cleaning the car, and fixing as much as I can before even attempting to show it to Bill…

Even with the cracked window, I was so happy to have the car back on the road. Save for an hour lost trying to fix the window, I made it home safely without any further issues. The car still even got 23 mpg on the highway after its ordeal. I’m not sure what’s next for Ski-Klasse. Maybe we delete the problematic SLS or replace the fuel tank with a fuel cell placed in a better spot. Maybe we’ll lift it or carve out some more clearance. Who knows, the sky is the limit!

On my way home, I couldn’t shake the feeling that the SLS makes the W210 an iffy budget car. You can get these things for pretty cheap and have a nice luxury car from a brand that carries prestige. Sure, while the SLS works, you get a smooth ride and can roll around with a load without tons of sag. All of that is great! But if the SLS fails and you don’t have access to a racing team, there’s a high chance you’re getting stuck wherever you are. And if you aren’t a car person, and therefore perhaps not aware of the dangers of running that pump dry, you could throw a belt, which will eventually lead to the engine overheating if you don’t shut things down quickly. That just seems all-around bad. I said it before but I’ll say it again, a blown strut shouldn’t run the risk of eventually overheating your engine.

Still A Fantastic Experience

20230924 175922

In the end, I still had tons of fun. Not only did I still have a blast in Tennessee, but I finally got to scratch “see a LeMons race” off of my bucket list. Sure, I was there only for the final two hours of the race, but I had a ton of fun watching awesome cars and talented racers put down some serious laps. I also got to witness the ceremony at the end of the race.

I saw a lot of parallels between LeMons racers and Gambler 500 participants. These are guys and gals who love wrenching, love solving impossible problems, and love pushing silly cars to their limits. Fixing Ski-Klasse didn’t seem like work to the team of Redneck Rampage Racin’, but a triumph of backyard engineering. They’re two sides of the same coin and I figure if LeMons and the Gambler somehow ever joined forces, the result would be the coolest car event on the planet.

20230924 160939

20230924 160740

20230924 160537

20230924 160618

Spending my time with LeMons racers that evening reaffirmed my belief that there are still tons of good in car culture. When it seems like there’s so much wrong in today’s world, these car people rallied together to help a stranger get home. They didn’t need to, but they did, and they were just happy to solve a mystery and help someone out. That brings tears to my eyes.

To Redneck Rampage Racin’, I cannot thank you enough for your help. Seriously, words cannot describe how happy you made me and how thankful I am to have found you. If your team is ever in Northeast Illinois, I’ll buy you all rounds of shots or whatever you drink!

20230924 174625

(Photos: Author, unless otherwise noted.)

Image17

About the Author

View All My Posts

31 thoughts on “Here’s How A Brilliant 24 Hours Of LeMons Team Saved Me From Getting Stranded In Our Broken Mercedes Wagon

  1. And this is why you buy a BMW E34 touring… some of them have a hydraulic SLS system, but it’s ridiculously easy to delete by just swapping in a regular power steering pump. The shocks/struts in the rear can then be replaced with conventional ones or coilovers, and now you’ve future-proofed it.

    1. Ahhh yes, the plentiful, cheap, and AWD E34 touring in the USA! >_<

      I wouldn't call them common, but I'd think an E46 or E61 touring would be a waaay better choice for their goal here of an AWD wagon for snow rallying. I leave out the E91 as its short suspension travel in xdrive guise makes it unsuitable for rough terrain and roads, and the E39 touring as it was RWD only – though the MT E39 528i touring should get an honorable mention as being a really well-balanced package.

      The E46 touring is pretty small, so that leaves the E61 as the closest equivalent from BMW. In the USA they're all air suspension when stock, which is fairly reliable, easy to work on, relatively inexpensive parts-wise, independent of other systems, and coil suspension if you want to convert is readily available. But coil springs can fail, too – I know because the front springs on my E61 both broke simultaneously while parked at the airport for a month while I was traveling, less than a year after the rear compressor died and two years after the original rear air springs died.

      If you went with the N52-powered 530xi, you'd have a reliable engine and less strain on the rest of the drivetrain than if you got the N54-powered 535xi. I have been through a transfer case, two rear driveshafts, a front one, and two front right CV axles, not to mention turbos, injectors, walnut blasting, many belts from oil leaks, etc., etc. on mine. In retrospect, while the 535xi is lots of fun, a 530xi is the much smarter (if slower) buy. I would only recommend the 535xi if you either can literally do all major work yourself (up to clutch and turbos), or can afford $10,000+ per year to have it maintained.

      Oh, and you can find the E61 – both 530xi and 535xi – with a 6 speed manual from the factory. They are exceedingly rare though, and go for a premium on the used market.

      1. Oh yeah, I forgot all about the AWD part of it, haha. I generally stay away from AWD vehicles as much as I can, I hate dealing with front axles and transfer cases, it’s just extra complexity that is completely unnecessary when living in the southwest which has no snow, ice, or rain. The most terrain you’ll see here is just dry dirt roads, which any RWD vehicle can tackle with adequate ground clearance.

  2. Beyond through and detailed. But let’s get back to “end of testing our snow racing car off-road”. Why was it lowered? I just can’t even begin to understand the reason or advantage. I gone trailing in all kinds of non off road cars. The last thing I would do would be to lower it. And more so on a somewhat long wheel base vehicle.

  3. What a great shakedown. Good job. The lessons learned are best done under these conditions. And, it’s nice getting home safely.

    The term for this is a “renegade run”. Driving stuff (home) that is otherwise not quite fit for the road. More specifically, parsko/mercedes/fill-in-name-rigged shit with a coat-hanger/panty-hose/spacing/etc… that gets you home.

    The thoughts going through our heads when we take that shower when we get home, “safely”. f$%#ing chefkiss

    1. My story would be when I bought my Trooper. It was 2003/4? It ran on 3 of 4 cylinders. It ran but probably had enough for 20 minutes of driving. Insurance (of course) and no plates. Buddy in front leading, buddy behind tailing. Made it home no issues. Basically, I had to keep it above 2000 rpms or it was dead. Was a hilarious ride. We were safe, but that was one fun renegade run.
      Eventually pulled and rebuilt the motor, top-to-bottom. Only downside was cash and a new computer. Never ran right until that would have to be done. Move to Europe and sold it. One of my few regrets in life.

  4. Next time you could try just disconnecting the level valve from the sway bar and tie it up in the neutral position so the fluid just runs in a return loop.

    That said the rubber on the struts lasted what 23-24 years. Not horrible on the reliability scale.

  5. Awesome story, and not at all surprising that a LeMons race would be where you’d find a bunch of folks willing and able to creatively solve the problem.

  6. Glad you were able to cobble it together! Lemons is the friendliest and most helpful group of racers you’ll find. I just finished a race last weekend and while there I was more than happy to loan the Autozone loan-a-tool wheel hub press kit that I used to replace the rear wheel bearings on my E30 to another team, who was able to get their car back on track.

  7. Thanks for doing all you do so I can read about it and not get dirty!

    I’m not sure what’s going on with these hydraulic/hydropneumatic/airmatic whatever systems, but car manufacturers can’t seem to get them reliable. There are numerous manufacturers selling replacement conventional suspensions for these things. I see a Range Rover or a Mercedes S class parked down on its knees maybe once a week around here. And I laugh like a maniac because I had Benz 6.9 with hydropneumatic and it was always in a state of semi-wrong. You get new accumulators and the pump starts acting up. You get a new pump and somehow tiny bubbles are in the system. You replace lines, bleed it, refill it, and now a strut is leaking, which needs to be sent out to a specialist to rebuild. Finally everything’s great and you go out to the garage and it’s down on the bumpstops. You start it, it rises back up and it doesn’t drop again for months. You start to breathe easy and then suddenly it’s ass-high but the front is low. How’d that happen? Who knows? Actually, I know: it needs a new leveling valve that a) costs a ton and b) will probably be defective straight from the factory. The third new one worked. The result is a stressful experience even when all is well because you know it’s just a matter of time. I would say the day you sell a car with hydraulic suspension vies with the day you sell a boat in terms of personal happiness.

    If you want to enjoy trouble free hydraulics, buy a forklift.

  8. Hey Mercedes I have to say your video at the beginning with no solution in mind and no production crew was impressive. Second, as I mentioned before those efficient Germans love looping everything into the same system however without backup solutions. I would never tie in a integral system to a optional system as was done here. But modern hydraulics allows bypass and shutoff for just this occasion. This occurrence would need a cutoff as you accomplished so well. But given Bill a duplicate layout with auto shutoff valves would not only have saved gallons of dumped hydraulic fluid.
    I am not sure why, even after all the articles, Bill lowered the car. I get if only ice no worries but any benefits? If not snow builds up and stops cars in PA.

  9. Thus proving once more that the 210 is an outstanding highway cruiser. Delete the SLS and enjoy driving long distances at high speeds in comfort.

  10. I had to drive about 50 minutes back to camp, where tools and help would be”

    The tools are back at camp?

    On my way home, I couldn’t shake the feeling that the SLS makes the W210 an iffy budget car.”

    How can this not be self-evident? How could any Mercedes be a good budget car?

    Mercedes in the US= high priced, high prestige, over engineered and over optioned accompanied by lower sales volumes and lesser 3rd party support. Any part needed from the dealer probably requires a small loan and long lead time.

    I would think a good budget car would be a high volume, widely supported and relatively simple car. The older mini pickups (Ford Ranger, Chevy S10 or Toyota 2WD pickups… those are good budget vehicles: simply, widely available and widely supported)

    1. The tools are back at camp?

      The tools to fix something like this? Definitely. At first, Bill sent me a line of text messages, beginning with the two I inserted toward the top of this piece. They were instructions on replacing the SLS lines, which there was no way we were going to do that on a muddy trail. According to Bill, I would have needed to buy brake lines and modify them to fit the SLS. Nobody in my trail group was carrying that kind of gear, but they did have that stuff at camp, including the necessary brake line!

      Of course, hindsight being 20/20, had we known the issue was the strut and had we known we could cut that specific line, yes, we could have fixed the problem right after the blow happened.

      In theory, an old Merc like this could be a good budget car. Aside from the problems encountered during the build process, the car’s been quite reliable. We’ve driven this thing across the country without issues and it still runs well after our abusive testing. But this SLS…oof, that spoils the whole thing.

  11. [Random Member who got to drive SK at 4Fest Note: I was so impressed with this build and it was indeed so much cooler than I thought. -3WB]. It’s always great to see people come together, figure out, and solve a problem… Even if it’s just a temporary fix.

  12. Great write-up, Mercedes, as usual! My faith in the goodness of humanity is restored, if only temporarily, in reading these stories. And I’d love to see a combo of the Gambler/LeMons. Credit to A. Barth for LeMambler! Wonderful idea and moniker!

  13. Editor’s Note: Bill did amazing work on this wagon. Like, it’s way cooler than you might think. -DT]

    Having read what Bill and the staff have already posted about it, I would love to see more in-depth pieces about this build. All of Mercedes’ writing about the triumphs and tragedies of this car’s off-snow travails has been incredible, but it feels like we haven’t seen all of the actual car and the engineering/fabrication that went into it.

      1. Thanks! Based on the date of that story, I think I was in an overwork-induced fugue state. I definitely remember opening it, but all of its content has clearly escaped me. Time for a re-read!

  14. Note that the spacers are not meant to be installed with a square drive, but with a hex socket. The square indentation was just to save injection mold material, not intended for turning the spacer.

    1. Indeed, we ended up using a gigantic hex socket. What confused us was that the packaging didn’t make it clear that the square indentation was not for a square drive, but it seemed like one should have fit. It really only said something along the lines of “insert socket then turn.” Not even the AutoZone guy knew what was going on.

      All that package needed was a line saying “XXmm socket required.” 🙂

  15. if LeMons and the Gambler somehow ever joined forces, the result would be the coolest car event on the planet

    LeMambler!

    That’s a great story – thank you for posting it. Car folk generally seem to be good folk.

Leave a Reply