You may remember that 250,000 mile blue diesel manual Chrysler Voyager from that old German automotive lighting supplier I used to write for. I bought the van in Germany for $600, limped it through the country’s rigorous TÜV inspection, and then road-tripped the crap out of it to Belgium, Sweden, Turkey, and everyplace in between. I will soon be reunited with this incredible fuel-sipping people hauler, as I’m having a family reunion in July. Only one problem: The U.S.-engineered, Austria-built, Italian-engined van in Germany just left my dad stranded on the side of the road (just one KM from his house, luckily). And while that may not be a big deal if this were a gas vehicle, on a diesel machine as simple as this van, I have every reason to be concerned. Let’s talk through it.
I realize I just wrote an article about one of my cars breaking down, and I also realize that — given the abundance of crappy vehicles in my fleet, there’s risk of this website becoming overrun with vehicular obituaries — I promise, that probably won’t happen. But I’m losing sleep over this one, so I have to tell someone about it. One morning last week I was awoken by a phone call from my mother. “I have bad news,” she started in a somber tone, my heart immediately raising a few RPM in response. “It’s about your van. It’s dead.” WHEW, that’s not so bad news, I thought. It’s probably just something simple — the van is a tank, after all. I’ve put 10,000 miles on it without a single issue.
But then I thought a little more, and actually, maybe this is a big deal.
See, on a gas car, there’s a whole lot of bullshit that can cause a vehicle to die. There’s an electric fuel pump that could stop sending fuel to the engine, there’s a fuel pressure regulator that could fail and cause fuel delivery troubles, there’s an entire ignition system (ignition coil, distributor, rotor, ECU) that could all fail, there’s an alternator that could fail and cut off that ignition, there are a bunch of sensors including mass flow sensors and throttle position sensors and on and on. None of this stuff is a big deal to fix; the problem is, though, diesels don’t have most of these parts.
My diesel Chrysler Voyager has no electric fuel pump, it doesn’t need the alternator to run since it has literally no electric ignition system, there are basically no sensors to fail — everything is mechanical. There’s a mechanical fuel pump sucking diesel from the fuel tank (through a filter), squeezing it, and sending that high pressure diesel to injectors at precisely the right time so they initiate the combustion process.
The system is so simple that I really don’t know why an old diesel vehicle like my van would shut off suddenly. I could see it stumbling due to a number of potential issues like a worn out mechanical fuel pump or a failing head gasket leading to compression issues. But a sudden stop?
If this were a gas car? It’d be no problem. Hell, I’m almost at the point where I expect at least one of my gasoline-powered cars to suddenly shut down on the highway. I usually swap out a crankshaft position sensor or an electric fuel pump, and continue on my way. But again, this Italian-built 2.5-liter VM Motori turbodiesel in my van doesn’t have many sensors and there is no electric fuel pump. That’s why people love old diesel vehicles — there’s just so little that can possibly go wrong. Hence my concerns. Because maybe what went wrong is a big deal; maybe all those forum posts about how bad this 2.5-liter diesel engine is were right, and I’ve basically just been given a limited-blessing from the car gods that has now run out.
The video above shows the mechanical fuel pump on my van. It runs off one of the gears connecting the crankshaft to the camshaft (i.e. the timing gears — see below). Motion from those gears is used to move a rubber diaphragm in the pump, which moves diesel to the injectors. And while, sure, it’s possible that diaphragm — or other internal bits — have failed, would that have lead to an immediate shutoff, or would it have stumbled? I’d think it’d have stumbled; that tends to be how fuel-delivery issues reveal themselves.
Maybe the gears running the pump failed somehow? This would have led to instantaneous shutoff, as there’d literally be no diesel flow at all as soon as the gears failed. But that seems highly unlikely, right? It’s rare for timing gears to fail.
I checked out the repair manual for the VM 425 engine family (four cylinder, 2.5-liter), and here’s what I found as the recommended diagnostic procedure:
A no-start condition pretty much always means a fuel supply issue. My van’s tank is full, and my fuel filter is new-ish, as is my air filter. There are no leaks coming from any of the fuel hoses or lines, and there’s probably no way that there’s an issue with those beefy metal timing/fuel pump-drive gears.
That sort of leads me to the “electrical fuel shutdown” solenoid being an issue, or that maybe the ECU that controls that is either bad or is connected to a bad wiring harness? But these seem like highly unlikely failures, especially since the car was sitting inside a garage, away from wire-chewing rodents.
Anyway, I’m now reading through the German 1994 Chrysler Voyager repair manual, specifically the “Dieseleinspritzanlage” (diesel injection system) section, and I have to say: This is some pretty dry stuff. Here’s something about a magnetic fuel shutoff valve:
It appears there may also be some sort of pedal position sensor “Drosselklappenstellung” on that fuel pump, which sends some kind of signal to the ECU:
I don’t know. I guess maybe there could be an electrical fault, here. But when the roadside “ADAC” mechanic came to help fire the car back up (That’s right; in Germany, if you ask for a tow, the mechanic will actually try to get your car going. He even loosened the injectors to check fuel flow!), he said there was no gas getting to the injectors and — per my mother — that intake air seemed to be flowing the wrong direction. So did my timing gears fail somehow?
My mom turned the engine over via video chat, and to me it sounded like there was compression. So maybe all hope isn’t lost? If it were a major mechanical issue, you’d assume it would either seize the motor instantly or cause some poor-running conditions (i.e. if the head gaskets failed or the bearings ate themselves) first — it wouldn’t just cut out immediately but still crank fine. Right?
I am worried. Deeply worried. And that worry won’t let up until I’m there in Germany to nurse this van back to health; if that’s even possible. I hope so, because this van is supposed to drive to the Land Of The Piaggio Ape in two months.
Try whacking the Datenubertragungs-Ausgangsschaltung with a Hochdruckkammer. That might get the spritzpumpe working again.
David – you say that diesels are supposed to be bulletproof and I agree the old ones should be. However, the new diesels are designed to fail. My neighbor has a 2018 Land Rover Range Rover v6 diesel and the Diesel Exhaust Fluid (DEF) system threw a code (bad DEF fluid, which it was not), and gave them 500 mile count down to sort it out. They didn’t and the car purposefully killed itself (no start) after the 500 miles were up. I think an article on this is warranted. If you don’t believe me, just search the interwebs for “Land Rover Diesel No Start message” and you will find a lot of owners with issues. What is surprising is that a modern car can be turned into junk due to a single failure for emissions quality.
Why would you let your dad drive that junk? Time for something else!
I have no offerings as to what the issue might be, but I wouldn’t write off the Krassler yet. I think this thing is fixable. It could just be an ECU, filter, or pump issue. So once you’ve figured that out, it’s just that plus some hoses and new motor mounts. That’s really not bad at all, given the van’s age. You got it to pass TUV so this thing’s got some years left in it.
Hope you can get it running again! My family had a ’93 Caravan SE when I was a kit and I still miss that van immensely (I’m 35 now)…
My parents split up and mom, being a single parent raising two kids didn’t give it all the maintenance it deserved and it still soldiered on carrying our butts all over the place and her to work. It was still working when we finally parked it. We had moved and lived in a large hill and the van was too heavy even with good winter tires to claw itself up the hill which was a big issue for elementary teacher mom and all the stuff she had to lug to and from school everyday. She replaced it with a ’93 Cavalier which was far worse in every way, but could at least get up the hill in the winter…
Would love to get another Caravan/Voyager of that generation someday for the nostalgia and feels….
Also, when you do get it working and take it to Italy, PLEASE send an Ape TM back for me! I REALLY want to import one someday! 😀
If you can’t find one as old as a ’93, I’ve been really happy with my 4th gen 2003, which can still be bought cheap even in this crazy used car market. I like the earlier ones without stow-and-go – they have more usable ground clearance for mild off-road use. Take the middle row out, and you have a poor-man’s VW bus IMHO, for a fraction of the price.
Let alone the 1993, the 2003 gen is almost gone here due to rust, sadly 🙁
Stupid Nova Scotian winters and the insane amount of road salt they use up here…
That generation is my second favorite Caravan gen after the ’93 gen! Always liked the bubble-y round styling 🙂
Once had a car suddenly die while driving but could restart it, it was the Neiman having some kind of false contact.
I hope it wasn’t it’s final fahrt.
so many comments about the non-existant in-tank transfer pump LOL
if enough people believe in it, would that make one suddenly materialize? 🙂
Maybe it’s time for a new project?
You can buy this wreck (engine runs) in Enköping Sweden for about 350$
https://www.blocket.se/annons/uppsala/chrysler_grand_voyager_2_8_crd_automat_7_sits/100626787
Even though diesel oil with questionable biologic elements in it (as it is commonly sold in Europe) is not as corrosive as gasoline with ethanol in it, soft fuel lines are still getting a lot of vibration and temperature fluctuations, and could let air in a tiny crack or a loose fitting somewhere. So I am willing to bet an injection unit I have in the workshop (Copenhagen area), that I have absolutely no idea where came from(!) or when, that the fault is air in the fuel system.
Small correction, high pressure in the pump cannot be generated by a rubber diaphragm. If the pump is the Bosch VE type, there is a small piston that alternates, pressurizing the fuel, and also rotates, thereby distributing the fuel to the correct cylinders in the correct time. I recommend looking into exactly how it works, it is an ingenious design comparable to the carburettor.
David explained that system when he was getting it running. A farm boy figured out what was wrong and put it right, saving David’s bacon.
David explained that system when he was getting it running. A farm boy figured out what was wrong and put it right, saving David’s bacon. But who knows
I had an 06 Jeep liberty CRD for a while and can honestly say I don’t envy you here. Mine was the later overhead cam version so a very different problem murdered my engine(timing belt skipped some teeth and bent the hell out of the cams, but you have pushrods and gears so I’m jealous) but mine did have a fuel pump failure and it was pretty sudden. I had the pump replaced and added an in-tank lift pump and it never had an issue on that front again.
Alternatively it could be the ecu or one of the sensors, I didn’t trust mine when I bought the Jeep so just had somebody that knew what he was doing go through it and re-flash the ecu for good measure.
It ain’t got no gas in it.
David, I work at a diesel fuel injection shop in Michigan, and I’ve rebuilt hundreds, if not thousands, of those injection pumps. If you need any help or need to talk through some possibilities of problems with it, just let me know. I’d be happy to help.
You are oversimplifying a diesel and the van. There are multiple things that will cause it to have died.
Being as it died completely with no warning start with electrical; fuel problems tend to have a ramp-up to total failure.
That engine is going to have some kind of fuel shut off or it would never turn off. It is either going to be a solenoid in/on the injection (high-pressure) pump or an external one that pulls a mechanical fuel shutoff on the injection pump. The external ones are very sensitive to how they are set up and can burn themselves out if not adjusted.
There is also some kind of lift (low-pressure) pump getting fuel to the injection pump; I have never seen a diesel where there was not a separate lift pump. It may be in the tank, on the filter head, or mechanically driven by the engine. If you saw a diaphragm style pump on the engine that is the lift pump; no diaphragm style pump can build the pressure required for a diesel engine to operate correctly. Look for issues there.
You could also have contamination issues clogging stuff or water issues…