My Mind Is Blown. This Man Cut The Sail Pillars Off A Honda Ridgeline And Welded Them To The Back Of A Jeep Grand Cherokee

Ridgeokee Ts
ADVERTISEMENT

I cannot believe what my eyes are seeing right now. This build by Nevada-based Jacob Collis involved cutting off the rear section of a first-gen Jeep Grand Cherokee’s roof and turning it into a pickup truck. But while hacking the roof off a unibody SUV is already a strange and questionable thing to do, the truck-ification of the Jeep isn’t the weird part — what’s weird is that Collis reinforced the unibody by welding on sail pillars from a first-gen Honda Ridgeline. Yes, you read that right.

We’ve seen so many strange build projects here on The Autopian that it really takes something special to get me bang on my keyboard, and this automotive Frankenstein, called by its maker the “Jenda GrandRidgeline Wagoneer,” absolutely qualifies, mostly because it makes absolutely no sense while at the same time making a tiny bit of sense. Hear me out.

A Jeep Grand Cherokee is a unibody vehicle, meaning that, instead of having a separate passenger-holding body bolted to a frame that handles the majority of the chassis loads, there’s just one single body designed to handle it all. Integrating the vehicle’s overall load-bearing structure into the body itself allows for more interior volume, better overall stiffness, weight-savings, and various other advantages. What it also does is make modifications to the body hugely problematic, whereas on a body-on-frame vehicle you could hack the body up all day and let the frame handle the loads.

Screen Shot 2023 12 08 At 3.02.43 Am

For the longest time, pretty much all pickup trucks were body-on-frame only, since a roofless truck bed is hard to make stiff; sticking with a strong ladder under the bed to take up the loads just made sense. But then came the Honda Ridgeline, which eschewed the frame for a fully unibody design. How exactly did Honda build a frameless pickup truck that could handle the bending and torsion loads that a truck would see? Well, Honda engineers installed “sail pillars” to each side of the vehicle. That’s these:

Screen Shot 2023 12 08 At 3.39.55 Am

Screen Shot 2023 12 08 At 3.02.12 Am

If the concept looks familiar, it may be because the newly-released Tesla Cybertruck uses sail pillars to provide sufficient stiffness to handle road/towing loads:

Screen Shot 2023 12 08 At 3.07.44 Am

These sail pillars (also called sail panels) are meant to tie the rear of the truck — where the loads come in via the trailer hitch and via the rear suspension — in with the roof, thus creating a larger moment of inertia to resist torsion and bending.

Maybe you can see where this is going. If cutting a unibody Jeep Grand Cherokee’s roof leads to structural concerns, and Honda fixed structural concerns on its unibody truck by incorporating sail pillars, then couldn’t one solve the Jeep’s problems by just installing the Honda’s sail pillars?

This is an absolutely outlandish thought. It doesn’t work like that! Those pillars have to be integrated into the original design, with Finite Element Analysis and all sorts of other simulations/tests done to make sure it all works together as a system, and it has to be welded into the structure just right. You can’t just stitch one truck’s sail pillars into a hacked up SUV and expect it to solve your bending/torsion problems!

Still, maybe it could help a little to tie that rear end together, and the idea of it is just so bafflingly absurd that I cannot help but absolutely love Collis’s build. “The idea originally came from this man out in New Zealand … the man who made [a pickup Jeep Grand Cherokee ZJ],” Collis told me over Facebook Messenger. “The problem is, if you look at this truck’s further photos you begin to see … where the piece on the back came from. It’s a fiberglass shell from a boat on the back, with a window panel placement and cutout,” he told me.

“When preparing the cut I took noticed of some of Jeep’s ZJ design features for an anti-taco [i.e. folding] effect. Should the B and C and D pillar ever wind up cut, they’re not compatible with a full fiberglass rear firewall,” he said. “The motor in these is usually a 5.2, and it has enough torque to twist and contort the body, even though it’s a unibody vehicle. And with the rear gone, I lost downward weight displacement in the rear because of the lack of a rear back.” I’m assuming he means that lack of a rear structure made the truck lose rigidity/strength needed to carry/haul loads or to go off-road.

403406914 3705883903066010 6828799358237197463 N

371521463 7688996337784396 6250092041542858700 N

403603296 1526132294898433 5980564966505353218 N

403618062 770010804959534 3228256262448715861 N 403408791 1014575119798592 8905253603751943956 N

403405915 388224790206536 427546985839271146 N

385526260 1064706508004254 9117679502204269511 N

“So to get the truck effect and give it some ability to retain its older safety feats, I gave it a full rear fire wall of an ’07 Honda ridgeline,” he continued.

403408775 24289025947411080 7316408713515448680 N
403408286 921669182662228 8588018917241330118 N
403417640 1088913402292559 3058027888016115168 N
“With a lil’ cutting and shaping, me and my buddy got the wall in and weld it in nicely without any Bondo.” Collis told me that folks in Reno typically just hack off the back end and leave it looking like a standard regular-cab pickup. “That’s wonky in my eyes at least,” he said. “They do this, or the whole back minus your gas tank goes, then they don’t seal or prime out any of the edges so the whole damn thing rusts after two years of mud bogging.”
403604076 2845498828920538 3955599857734670430 N
377151212 1064484948082036 5038966148029039109 N
403612348 2917725058358977 6464392281108326056 N
403626394 730302315680047 7162604554411004196 N 403404028 1008349490261156 1387336425503357847 N
In a few sentences that were a little hard to understand completely, Collis talked about how hot rods and the Chevy SSR pickup had inspired his build. “I chose the Ridgeline because I love [Ed Roth’s] Rat Fink, and there’s an old Hot Wheels automotive designer that made the Dodge Surf Wagon who helped head the design team for the Chevy SSR truck concept – that yellow beach-looking truck.”
“The angle of the Ridgeline and the forward hood angles on the ZJ … they flow well. While my wife was in labor, I set up some auto as designs between the ZJ and a Chevy avalanche the Subaru Outback Baja the Honda Ridgeline … I was never going to pick this one, but I put it in because most do the Ford Ranger only because of compatibility … the Ridgeline took the prize. I just didn’t want a flat-looking single cab.”
He mentioned that he noticed a lack of stiffness when he just hacked his Jeep up, especially off-road, and that the Ridgeline’s sail pillar actually seemed to have helped. “Anywho, the problem was weight, and I felt like the guy whose Jeep I modeled mine after chose a copout for a quick design fix. And because I’ve driven the Jeep with a back, without a back, and with a new back, I know he’s missing out on hillclimbs. And moderate trails must be a pain in the ass on his, ’cause mine has the abilities his doesn’t.”
404039091 317177331267017 847572872012404453 N
386884750 718610879877746 4018623996304309449 N
386440999 3672451082976807 2763021345498102216 N
“It’s my first truck, given to me by an old friend who I happened to used to steal cars at 18 with. I got out of prison, got my license, and he gave her to me. Her name is Dignus Mjolnir, a mix between Gaelic and Latin that translates to ‘for those who are worthy,'” Collis told me. “We’ve turned into family men now, but when she broke down her fan blade got sent through the radiator, and then the water pump, then out the hood. So I spent a year and a half refusing to let her go.”
403603333 199497076571386 3917845171375508971 N
386884750 718610879877746 4018623996304309449 N
404039091 317177331267017 847572872012404453 N
403406215 1186001416120250 7403112314950615340 N
403626394 730302315680047 7162604554411004196 N
403604071 321110584101876 8307523743696059915 N
“Now she’s the Jenda GrandRidgeline Wagoneer,” Collis concluded. “I say that because I plan to make a couple more, kinda ship of Theseus the idea out a lil’ more. I plan to do an XJ and give it to my wife and name it Minnie-Me … I plan to 5.7 Hemi Magnum-swap the power plant and give it two inches, try and get a wishbone or a pillar suspension axle unit underneath.”
403403179 366282752450232 615468559307477350 N
403397962 248441318031859 8901100776324560131 N
403397946 394596932896240 8087295312944814123 N
387334483 1541351803358998 5190648572346602428 N
“The plan overall is to get as much publicity at the start, refine the look to a fine point, and hopefully, hell or high water, I get some people to jump on the bandwagon to make this further a reality. Her prototype name is the “MDM 0 – X – 001 Jenda Grand Ridgeline Wagoneer Series developed by MDM motors,” which is a dream company of mine called Modern Day Motors. But she’s a racetrack support truck / prerunner. I wanna enter her into SCORE International event and the DAKAR World Rally by the end of her life.”
Open photo
This whole thing is just ridiculous. I won’t lie and tell you that I completely understand our entire interaction over Faceook Messenger, as it seems perhaps Collis was using  dictation software, but in any case, the man did hack the sail pillars off the back of a Honda Ridgline and weld them on the rear of a Jeep Grand Cherokee ZJ to build a pickup. And in case it wasn’t clear, it wasn’t just the sail pillars, it was also much of the inside of the bed, and the whole back of the cab, with the Ridgeline’s rear window.
Screen Shot 2023 12 08 At 3.49.09 Am
This is just madness. Absolute madness. And even though the engineer in me cringes a bit, I still am – for reasons unknown – here for it.
Photos: Honda, Jacob Collis, Tesla

About the Author

Jason Torchinsky

View All My Posts

81 thoughts on “My Mind Is Blown. This Man Cut The Sail Pillars Off A Honda Ridgeline And Welded Them To The Back Of A Jeep Grand Cherokee”

  5. I so desperately wish I still had the time to do fun things like this. Alas, as I’ve grown older I have acquired a lot of skills for which I have no time to put to use. Perhaps someday.

    1. I guess I don’t know enough about off roading, but is there no way to increase the capability of a Ridgeline to rival the ZJ? I guess the Ridge doesn’t have a real 4WD system right? Problem #1 I imagine.

      1. 3 time Ridgeline owner checking in here. Currently have a 2013 RL in my fleet.

        You can do a few things to bump up the Ridgeline’s off road capability, but it is really never going to be more than a soft-roader. The real weakness isn’t the unibody construction, it is really the driveline layout. A transverse engine transmission orientation, and a 4WD system that is basically front wheel drive until it detects wheel slippage, not exactly the stuff that off road dreams are made of. Add no solid axles and very limited articulation, bad approach and departure angles, I could go on.

        I love my RL for what it is, but I also know what it is not. Its 4WD system is good for what it does, but it was never designed to be the basis for a hard core off-roader.

      2. I was mostly teasing, but I do think it’s not the best use of time and energy. The ZJ is a pile, and there’s little to convince me otherwise. Couple other donors that I can think of that would have been wiser. Still a neat project though!

  8. I actually intend to do this to a Kia Sportage. but I would build a structural cage to go along with the sail panels to keep my little car from folding in half. in other news would anyone like to donate a kia sportage to me, my brother blew up the engine AND transmission on my last one. so it has gone off to the scrap pile

    1. > my brother blew up the engine AND transmission on my last one. so it has gone off to the scrap pile

      Your brother is the one who should go off to the scrap pile.

      1. it had 280k miles on it and he was doing the same thing I would have with it. he was trying to get up a pretty steep hill on a 4×4 trail that many stock jks cant do. I don’t blame him at all for it, i just would have pulled more parts off it before sending it to get scrapped.

        1. it dropped a valve and ate a gear in the automatic transmission. also should note it was a 2.4l 4speed automatic front wheel drive sportage. Not the car to do these things in, but the most fun to do these things in.

    1. “Others still contemplate things others have done and ask why the fuck they would commit such offenses against taste and sensibility.” — OJ Simpson

  17. Decent idea, flawed execution, needs a lot more bodywork including a ton of bondo… actually on second thought, that bondo will crack immediately the second it starts twisting off-road. Yeah I don’t know how to salvage that.

      1. Yes, I’d love a nice Comanche, but that is because I primarily want it for “small truck stuff” more than offroading. It is just a really great size in my book, low load floor, etc.

        I’m also not going to go do my own welding like this guy. So “nice” to a guy who is unafraid of welding 1/4 of a Honda onto his Jeep is probably different than my definition of nice.

    1. Agreed. I find it ugly as heck and completely silly. But I will happily support each person doing silly things to their own cars as long as it’s still road safe (or driven off-road only).

Leave a Reply